SHoW DMX NEO Transceiver
All SHoW DMX Neo products feature the ability to optimize control of output power, full or limited bandwidth broadcast, and the ability to broadcast less than the full DMX packet to shrink the radio footprint. For the users who do not want to manually optimize their broadcast, SHoW DMX Neo products also have Neo Adaptive Mode that will select only open radio channels to broadcast on, with no user intervention needed. All SHoW DMX Neo products will also ?heal? lost data packets.
Key features:
Three User
Selectable Broadcast Modes
In SHoW DMX
NEO Mode, CTI's proprietary system synchronizes the FHSS (Frequency Hopping
Spread Spectrum) hopping period so that every DMX data packet is transmitted
completely during a single hop. In SHoW DMX Neo Adaptive Mode, the system will
automatically adapt away from interference with no user intervention
necessary. In SHoW DMX Classic Mode the system is exactly compatible with
all existing older SHoW DMX systems.
Adjustable
Output Power
SHoW DMX Neo has adjustable broadcast power from 1-72mW ETSI. This
allows the user to adjust the output power to meet the application
requirement. The option of adjustable output power allows users to select
only the power needed and to respect the wireless needs of their colleagues on
their production, and other wireless users in the area. This philosophy is
diametrically opposed to some other manufacturers who sell powerful radios with
only one output setting designed to overpower all radio users in the area.
Adjustable
Hopping Patterns, Including Full Bandwidth Hopping and Limited Bandwidth
Hopping
SHoW DMX Neo and Neo Classic Modes offers more than one kind of user-selectable
FHSS hopping mode. In full bandwidth hopping mode, the system will continuously
and pseudo-randomly hop between channels across the full 2.4GHz spectrum. This
mode is available at any output power setting, and is quite typical of all FHSS
radios.
In the
Limited Bandwidth Hopping mode, the 2.4GHz band is divided into sub-bands. Each
sub-band occupies approximately 40% of the full band, with one positioned at
the low end, one in the center, and one at the high end of the full band. This
allows the SHoW DMX Transmitter to be set to hop and broadcast in a different
area of the spectrum to minimize or eliminate interference with Wi-Fi or other
channel specific or limited bandwidth equipment.
Limited Burst
DMX Output
In Limited Burst mode, the user may select for broadcast any contiguous group
of 32 or more DMX channels in multiples of 32/51 (Classic/Neo) channels. These
may be assigned to any starting address that will accommodate the burst size.
This will reduce the amount of radio energy that is broadcast, thereby reducing
the potential for interference with other systems. For instance, if a show
needs only 128 channels of wireless DMX, the system can be set to broadcast
only 128 channels, causing the radio to go silent 75% of the time
(1-(128/512)=.75). If only 64 channels are used, the radio will be silent 87%
of the time. This silent time reduces overall radio spectrum activity and
increases the chances of all other radio signals in the vicinity to be
broadcast successfully.
SHoW DMX Neo
Adaptive Mode
In SHoW DMX Neo Adaptive Mode, Adaptive Spread Spectrum Frequency Hopping
identifies and masks off hopping channels with interference, replacing them in
the hop sequence with alternate channels. If users choose not to use
manual settings, they can choose this setting instead.
Lost Data
Replacement
SHoW DMX Neo ?heals? incomplete data packets with the most recent correct data.
Ethernet
Based Protocols
The SHoW DMX Neo Transceiver is provided with an RJ-45 connector and additional
processing capacity to allow sACN, Art-Net, KiNet, and Pathport input and
output.
Ultra Low
Latency
Total system latency of 7ms or less
Simple
Default Plug and Play Mode
The SHoW DMX Neo system has a sophisticated user interface allowing complete
control of a number of settings, but in its default mode, SHoW DMX Neo is
completely plug and play. In its factory mode, or by resetting factory
defaults, Transceiver and Receiver will wake up in contact with each other and
no other settings are needed unless the user chooses to make them. With all its
sophistication, the SHoW DMX Neo system is also one of the simplest systems
available.
RDM
The SHoW DMX system uses RDM communications for all remote device control and
configuration, or for any inter-device communication required. This provides an
easily understood method for managing requirements such as Receiver strength
and Dimmer address setting. RDM commands may be issued from an upstream
RDM controller such as a console, or from the Transmitter.
LED BUY AND TRY PROGRAM
|
Our LED buy and try program provides our customers a 100% risk free, way to test any LED before making a larger purchase.
Are you thinking of switching to LEDs but not sure if the LED will work for you? No problem! Buy a few pieces of
what you need to test and then send back what you don't like or purchase more if you do like. You can return any
LED bulb or fixture within 14 days of receiving it for a full refund, including the original $8 shipping charge.
You will only incur the cost of returning the items to us. Our buy and try program is limited to LED orders under $200 so if you are involved in a larger project please contact us at
1-800-432-7995 or email us sales"at"superiorlighting.com.com prior to placing your order. We will gladly find a way to help you test some items prior to purchasing large quantities. All items returned, must be returned in original manufacturer packaging, and in the same condition that they were received.
|
WARRANTY CLAIMS & RETURNS
|
Our goal is your 100% satisfaction with every order! No hassle 14 days returns.
We stand behind the products we sell. If for any reason you are not satisfied with a purchase you may return a product within 14 days of receiving it. Please inspect all products upon receipt. If an item arrives broken we will make arrangements to either refund or replace
the item for you. Warranty claims can be filed within the stated warranty period of the item.
Please contact customer service at 1-800-432-7995 or email help "at" superiorlighting.com to receive a return or warranty claim authorization.
PLEASE DO NOT SHIP ITEMS BACK TO US OR TO OUR MANUFACTURERS WITHOUT PRIOR AUTHORIZATION!
|
SHIPPING RATES
$9.95 Flat Rate on all ORDERS!
Orders outside the 48 contiguous United States
Additional shipping and handling charges will apply to orders shipped outside the 48 contiguous United States (including Alaska, Hawaii and other U.S. Territories).
Please
Contact Us if you are placing an order outside the Continental US and we will advise you of the shipping charges to that destination.